E-Cig-Reviews.com - Forum

Vape Exchange => Wanted => Topic started by: bob2709 on July 27, 2012, 07:59:27 AM

Title: 14250 Batteries
Post by: bob2709 on July 27, 2012, 07:59:27 AM
Was just wandering if anyone has a pair of 14250 3v batteries for sale? Wanting to try my vmod at 6 volts. Just thought i would ask before i order from the states gain. Waited a month the last time.
Title: Re: 14250 Batteries
Post by: stevemontuno on July 27, 2012, 04:22:14 PM
might be an idea to see if the cr2's(15270's) work in your mod they are only 1mm wider& 2mm longer than the 14250's so might fit in your mod,,

http://www.liberty-flights.co.uk/product.asp?id=23 (http://www.liberty-flights.co.uk/product.asp?id=23)

if you do remember ECR69 for discount ;)
Title: Re: 14250 Batteries
Post by: bob2709 on July 27, 2012, 04:33:56 PM
Cheers. Will do a bit of googling.
Title: Re: 14250 Batteries
Post by: stevemontuno on July 27, 2012, 04:39:49 PM
Cheers. Will do a bit of googling.

the 15270's are usually used to vape at 6v in a 14500 battery mod,,, check how much room you have in your mod with your 14250's in,,if they are a loose fit the 15270's should work ok
Title: Re: 14250 Batteries
Post by: stevemontuno on July 27, 2012, 04:43:07 PM
infact if this is the mod your on about the cr2's will fit ,no probs ,

http://www.youtube.com/watch?v=FNC6NEbaT6k# (http://www.youtube.com/watch?v=FNC6NEbaT6k#)
Title: Re: 14250 Batteries
Post by: bob2709 on July 27, 2012, 04:50:04 PM
Cheers. pretty sure they will go in. There is a plenty of room length ways as maybe couple mm's width, even more if i took the 2 sticky pads that keep the 14500 tight out.

 Will a trustfire tr- 001 charge these?

 Have heard of people using spacers with these batteries.
Title: Re: 14250 Batteries
Post by: bob2709 on July 27, 2012, 04:52:04 PM
That the 1 ive got, vmod 2.0. Just received it yesterday after waiting a month. Great little mod though, putting 100% vg through it and am having no problems.
Title: Re: 14250 Batteries
Post by: stevemontuno on July 27, 2012, 04:54:12 PM
youll need spacers to charge with a tr-100 ,,or a cr2 charger.
Title: Re: 14250 Batteries
Post by: bob2709 on July 27, 2012, 04:58:10 PM
Cheers for all your help. Charger only costs a fiver so gonna order a pair of batteries and the charger. Dont suppose you know where to get short cartomisers? i received 1 silo cartomiser with it and it works ace but dont fancy ordering from the states again. They are the same length as a standard atomiser.
Title: Re: 14250 Batteries
Post by: funkybunch on July 27, 2012, 07:08:15 PM
Here are some shorter cartos

http://www.vapingthings.com/510_MINI_CARTOMISERS_-_152c_25_AND_35_OHM_-_5_PACK/p1311952_6753083.aspx (http://www.vapingthings.com/510_MINI_CARTOMISERS_-_152c_25_AND_35_OHM_-_5_PACK/p1311952_6753083.aspx)
Title: Re: 14250 Batteries
Post by: stevemontuno on July 27, 2012, 07:35:39 PM
make sure if you get those mini carto's you dont get the 1.5ohm ones for 6v vaping as they will go pop straight away,,,the 3.5ohm ones will probably be best,maybe even the 2.5ohm,,,,,,,

the 1.5ohm will be great for your 3.7v setup though  ;)
Title: Re: 14250 Batteries
Post by: bob2709 on July 27, 2012, 09:39:00 PM
 Not totally sure what i am going to get yet. Probably buy a pack of 1.5's and 2.5's, also set of batteries and charger. Thanks for pointing me in the right direction. Saved me ordering from the states again and having to wait ages.
Title: Re: 14250 Batteries
Post by: bob2709 on August 01, 2012, 09:54:46 PM
make sure if you get those mini carto's you dont get the 1.5ohm ones for 6v vaping as they will go pop straight away,,,the 3.5ohm ones will probably be best,maybe even the 2.5ohm,,,,,,,

the 1.5ohm will be great for your 3.7v setup though  ;)

Have decided that 6v is definetely not for me. For a start can hardly keep the carto in juice, the batteries were such a tight squeeze that i was nearly breaking the springs trying to remove them. The vapour is also far too warm.

Have now got the 1.5 ohm mini cartos, with 14500 battery and 100% vg juice as my setup. is a pretty amazing vape ! Probably the best set up ive ever had. Will hang on to my small batteries and charger because you never know what will come along.

Cheers for the help.

Bob
Title: Re: 14250 Batteries
Post by: funkybunch on August 01, 2012, 09:57:50 PM
I find that low res cartos at 3.7v are pretty damn good for flavour and vapour
Title: Re: 14250 Batteries
Post by: bob2709 on August 01, 2012, 10:08:08 PM
ive pretty much always been the same, 3.7v with boge lr's. Hits the spot for me. Lose flavour sometimes when you go higher.  Have had both the itaste and vmod for a week, barely used the itaste . Few hours at most. Handy little variable voltage device. Can always put a carto tank on it . Not keen on the standards atty and tanks, there not great with vg juices. Will try dilluting some when i get more.
Title: Re: 14250 Batteries
Post by: stevemontuno on August 02, 2012, 05:35:16 PM
yeah bob,,,6v vaping was only really popular before the LR atty/cartos were on the scene,,,,,since the LR's came about that kind of made 6v vaping kinda pointless really,,,i guess folks still like to try it though just to see the difference for themselves,,,,,