E-Cig-Reviews.com - Forum

Device Chat => Variable Voltage / Wattage Vaping => Topic started by: itsmeitis on December 27, 2015, 01:14:53 PM

Title: Firmware Upgrades
Post by: itsmeitis on December 27, 2015, 01:14:53 PM
direct links to the latest firmware upgrades for new and upcoming, upgradeable devices ...

reuleaux-rx200 (http://www.wismec.com/product/reuleaux-rx200/)

Joyetech-eVic Mini (http://www.joyetech.com/mvr-software/?sid=155)
Title: Re: Firmware Upgrades
Post by: Capt12B on December 27, 2015, 01:17:28 PM
Thanks Ged, bookmarked and shared with a FF who just got his :)
Title: Re: Firmware Upgrades
Post by: wyrm1973 on December 27, 2015, 08:04:22 PM
Reuleaux DNA200 Setting File/Evolv Firmware (http://www.wismec.com/product/reuleaux-dna200/)
Title: Re: Firmware Upgrades
Post by: igetcha on December 27, 2015, 11:28:13 PM
tried numerous times now to update the VCT Mini but the software doesn't recognise the mod being connected when i plug in the USB :(
Title: Re: Firmware Upgrades
Post by: funkybunch on December 28, 2015, 06:16:37 AM
tried numerous times now to update the VCT Mini but the software doesn't recognise the mod being connected when i plug in the USB :(

I had the same problem with one of mine, I tried a different USB cable and it worked. Might be worth a try. Hope you get it sorted
Title: Re: Firmware Upgrades
Post by: buzbybarz on December 28, 2015, 11:02:23 AM
tried numerous times now to update the VCT Mini but the software doesn't recognise the mod being connected when i plug in the USB :(

I had the same problem with one of mine, I tried a different USB cable and it worked. Might be worth a try. Hope you get it sorted
I had the same with mine (using a mac) the trouble was it switched itself off then wouldn't switch on. I pulled out the battery and it started working. I will get my son-in-law to do it on his PC.  :banghead
Title: Re: Firmware Upgrades
Post by: wyrm1973 on January 14, 2016, 10:06:56 AM
Bump v3.00 firmware for rx200 released
http://www.wismec.com/product/reuleaux-rx200/
Title: Re: Firmware Upgrades
Post by: itsmeitis on January 14, 2016, 12:46:52 PM
great stuff - much prefer the newly implemented mode change - even though i had no complaints with the old system 8)
Title: Re: Firmware Upgrades
Post by: itsmeitis on January 14, 2016, 01:23:37 PM
incase anyone may want to investigate or determine temperature coefficiency, then this comprehensive calculator from steam-engine, might help.

http://www.steam-engine.org/wirewiz.asp
Title: Re: Firmware Upgrades
Post by: funkybunch on January 14, 2016, 03:38:40 PM
Nice one - bookmarked that one :)
Title: Re: Firmware Upgrades
Post by: Capt12B on January 14, 2016, 04:30:33 PM
Thanks for the link and will try to update :)
Title: Re: Firmware Upgrades
Post by: Niteowl on January 14, 2016, 11:08:50 PM
If anyone is having problems with connecting etc, just send it to Ritchie ! He'll bang the crap out of it with a huge hammer and fiddle with a screwdriver to get anything to work ! If all else fails, i hear he has a soldering iron for any "surgery" that might need doing  :P  Might only be a temporary fix though, as you know Ritchie  :camp
Title: Re: Firmware Upgrades
Post by: itsmeitis on January 15, 2016, 05:06:21 PM
TCR values for the RX200, eVic VTC Mini and Cuboid.

TCR Values based on a single round wire:

Stainless Steel 304
101 - 105

Stainless Steel 316
88 - 92

Stainless Steel 316L
88 - 92

Stainless Steel 317L
94

Stainless Steel 430
138

Titanium Grade 1
366

Titanium Grade 2
352

Nickel Ni200
600 - 620

to enter TCR Edit mode: turn device off by pressing the power button 5 times - hold power + up button together for 5 seconds to enter memory pre-sets (M1/M2/M3)

to use pre-set: with device on, press power button 3 times then cycle through factory pre-sets until reaching memory pre-set - M1/M2/M3
Title: Re: Firmware Upgrades
Post by: wyrm1973 on April 14, 2016, 09:13:22 AM
Firmware 3.10 Version

http://www.wismec.com/product/reuleaux-rx200/

new #firmware V3.10 for #RX200, where maximum output can be reached to #250W!!!



Title: Re: Firmware Upgrades
Post by: emtronea on July 04, 2016, 12:21:00 AM
if it works dont fix it  :P
Title: Re: Firmware Upgrades
Post by: Big Bill on July 04, 2016, 10:38:51 PM
There is a new (250W) update for the RX200s (v4.1)

http://www.wismec.com/software/wismec-tc-software-for-upgrading-reuleaux-rx200s/