E-Cig-Reviews.com - Forum

Device Chat => Repairable Atomisers => Topic started by: ilegal on May 18, 2014, 02:19:40 PM

Title: Fogger V4
Post by: ilegal on May 18, 2014, 02:19:40 PM
Just got one of these and it's really good - VERY happy with it. It was also my first attempt at using cotton and making micro-coils. Turned out perfect first time so I'm pretty gobsmacked I have to say as I usually struggle with builds. Basically followed what this guy did his video:

https://www.youtube.com/watch?v=DwLyi_KfbzM (https://www.youtube.com/watch?v=DwLyi_KfbzM)

I've got some Virgin Vapors Organic Chocolate Cake going on (100%VG) and it's pretty awesome  :D

THe only real weird thing is my V4 (from Vape N Quit) has a couple of things that are different from all the others I can see online. It doesn't say "v4" next to "Fogger" on the internal chimney and the airflow mechanism is different: rather than a ring that rotates so you line up the hole in teh ring with the hole in the atty body, it has a ring (without any holes) that screws up and down so closing off or opening up the hole in the atty body. I've stuck a couple of pics below so you can see what I mean. No idea why it's different to others online. Any ideas?
Title: Re: Fogger V4
Post by: itsmeitis on May 18, 2014, 02:29:10 PM
THe only real weird thing is my V4 (from Vape N Quit) has a couple of things that are different from all the others I can see online. It doesn't say "v4" next to "Fogger" on the internal chimney and the airflow mechanism is different

allegedly - theirs are sourced direct from the manufacturer unless stated otherwise ... ;)

so it must be that everyone else have the snides :P 
Title: Re: Fogger V4
Post by: ilegal on May 18, 2014, 02:32:53 PM
Hahaha it did cross my mind. It did come in the proper Yi Loong holograph box etc with all the bits. I just wonder if it's just basically version 3.9 lol  :))
Title: Re: Fogger V4
Post by: ilegal on May 18, 2014, 02:40:43 PM
Just noticed another difference to the others online - the bottom screw in the 510 fitting looks to be copper rather than whatever all the others are made of. Maybe it's V4.1  ;)

Title: Re: Fogger V4
Post by: justin case on May 18, 2014, 02:51:51 PM
you got the very latest version...4.1 as they call it, the screw air control and brass center pin confirms this after what i have read online.
Title: Re: Fogger V4
Post by: ilegal on May 18, 2014, 02:53:45 PM
 :wave hurray! thanks Justin  :D
Title: Re: Fogger V4
Post by: ilegal on May 18, 2014, 03:51:52 PM
Got these on the way from FT to go with it - already dispatched to overseas country so prob a week or so:

https://www.fasttech.com/products/1644200

(http://awesomescreenshot.com/0a22tmu7f3)

MIght get that copper nemmy clone too for some proper mixing up :)
Title: Re: Fogger V4
Post by: itsmeitis on May 18, 2014, 03:55:11 PM
nice those - and surprisingly well built too 8)
Title: Re: Fogger V4
Post by: ilegal on May 18, 2014, 03:59:44 PM
Cool. I've got to do something - the black fogger looks pretty well weird sitting on a ss mod I have to say  :D
Title: Re: Fogger V4
Post by: itsmeitis on May 18, 2014, 04:11:58 PM
it'll look spot on with those 8)
Title: Re: Fogger V4
Post by: Gazrick on May 23, 2014, 08:54:22 PM
I find its open or nothing on mine lol
Title: Re: Fogger V4
Post by: funkybunch on May 23, 2014, 08:56:04 PM
I just got one of these, trying it out now :D
Title: Re: Fogger V4
Post by: ilegal on May 23, 2014, 09:00:14 PM
I find its open or nothing on mine lol

Hahaha yep feels a bit like that hey!

I'm getting used to mine now with the screw down air thing rather than the one with the hole. Just still faffing up the resistance of the coils lol but will give it another bash tomorrow. If you've got the air control with the hole in try some tape inside like the guy I linked to in teh vid above maybe

Go for it funky, I love how easy it was to set up and no leaks etc. The black one looks the dogs too (and my silver one turns up tomorrow  ;D)
Title: Re: Fogger V4
Post by: Gazrick on May 23, 2014, 09:08:46 PM
Other than the air hole it's awesome
Title: Re: Fogger V4
Post by: ilegal on May 24, 2014, 07:20:12 PM
Just recoiled it etc and went to fill it for what would be the second time - had a total nightmare trying to get juice into it. Was like it was blocked (but it wasn't) and juice kept wanting to come straight back out the fill hole

I tried the air holes thing fully open and closed didn't seem to make any difference. I'll be picking my ss one up tomorrow so I'll try work out what it might be - don't want to break this one down now I've finally got juice into it lol  ;)
Title: Re: Fogger V4
Post by: justin case on May 24, 2014, 07:42:57 PM
is the tip of your bottle making an air tight seal, you could just be building up pressure in the atty and that would explain the reason why the juice wont enter
use a hypodermic needle or a different bottle with a thin tip and see how you go.
Title: Re: Fogger V4
Post by: ilegal on May 24, 2014, 08:10:27 PM
Cheers bud, that's the weird thing it wasn't forming a seal - it's a metal hypo needle bottle so there's lots of room for air to come back out. I've just taken it all apart and this time it was a bit easier filling. I'll see how it goes
Title: Re: Fogger V4
Post by: Gazrick on May 24, 2014, 11:12:52 PM
It done that to me too. Was very weird!
Title: Re: Fogger V4
Post by: ilegal on May 25, 2014, 08:38:21 AM
Don't know exactly why but I think it might be over-tightening the chimney inside - noticed when I loosened the top off (which rotated the chimney a bit) a tiny stream of bubbles came up from where the channels go under and into the chimney. Or maybe I've now flooded it lol  :D
Title: Re: Fogger V4
Post by: Gazrick on May 25, 2014, 10:31:41 AM
Let me know if you can now fill it
Title: Re: Fogger V4
Post by: ilegal on June 25, 2014, 09:06:11 PM
Hi Gaz, if you're still getting updates on this - yes, it seemed to be the chimney being over-tightened. Also, I found holding the needle pretty vertical to the base seemed to help a bit but that could have just been my imagination. Maybe this is why some of the videos talk about not letting the wool all the way down the channel - so air can push through a little and release pressure through the chimney

Anyway, who knows but it seems a bit better now :)