E-Cig-Reviews.com - Forum
Device Chat => Repairable Atomisers => Topic started by: Big Bill on April 06, 2012, 04:03:14 PM
-
To fit with the GG Proteus ...
http://www.youtube.com/watch?v=vdx4IOEwURM# (http://www.youtube.com/watch?v=vdx4IOEwURM#)
"The Penelope will take 3ml of liquid and it will be at 47,5mm. Its very very small as I see it. I made a 18mm mouthpiece so the total length with the mouthpiece attached will be at 65,5mm"
-
I like the atty part ......... ;D
-
im sure its going to be a great repairable atty judging by his last 2 attempts,,,,,,i would be really interested in him developing a genesis style atty too,,i recon he'd do a great job of it,.id have to have one if he did,,,,,dont think ill be bothering with this one though as i already have the iatty and odysseus,,,but hey,never say never,,,lol
-
i think imeo should have employed a smarter looking reviewer for that video...the man in it looks very dishevelled and confused..not really in keeping with the GG image is it?.
-
i agree JC ... be more apt if he'd used this bloke. :P
-
i think imeo should have employed a smarter looking reviewer for that video...the man in it looks very dishevelled and confused..not really in keeping with the GG image is it?.
Just so you know... Thats Imeo himself. LOL
-
i think imeo should have employed a smarter looking reviewer for that video...the man in it looks very dishevelled and confused..not really in keeping with the GG image is it?.
Just so you know... Thats Imeo himself. LOL
i was waiting for that....lol
-
I was thinking the same ??? Lol
-
To fit with the GG Proteus ...
http://www.youtube.com/watch?v=vdx4IOEwURM# (http://www.youtube.com/watch?v=vdx4IOEwURM#)
"The Penelope will take 3ml of liquid and it will be at 47,5mm. Its very very small as I see it. I made a 18mm mouthpiece so the total length with the mouthpiece attached will be at 65,5mm"
Look like he is just thinking, "What the hell am I bothering to do this for, just transfer your cash into my account directly and save me the effort"
-
It will sell out on the first day & be "out of stock" till the next GG gadget comes out. And so it goes "ad infinitum"...
-
;D
-
It will sell out on the first day & be "out of stock" till the next GG gadget comes out. And so it goes "ad infinitum"...
yep. but the question is why does he allow this situation to happen every time?....is it bad judgement about the amount needed to satisfy demand?...is he scared of making too many and having them unsold?....maybe it's deliberate to make them rare and exclusive to enhance the desirability of them....who knows?.
-
It will sell out on the first day & be "out of stock" till the next GG gadget comes out. And so it goes "ad infinitum"...
yep. but the question is why does he allow this situation to happen every time?....is it bad judgement about the amount needed to satisfy demand?...is he scared of making too many and having them unsold?....maybe it's deliberate to make them rare and exclusive to enhance the desirability of them....who knows?.
Yeah I think its the last bit. Either that or he thinks stuff the customers, just wanna make sure I make enough money for myself.
-
Details a little sketchy but it looks like you with be able to pre-order and reserve a serial for a Proteus and Penelope setup via ECF GG forum
http://www.e-cigarette-forum.com/forum/gg/279447-official-gg-p-p-serial-number-request-thread.html (http://www.e-cigarette-forum.com/forum/gg/279447-official-gg-p-p-serial-number-request-thread.html)
(sounds like his current batch will be 2200 units)
info on the Proteus and Penelope
http://www.e-cigarette-forum.com/forum/gg/278892-p-p.html (http://www.e-cigarette-forum.com/forum/gg/278892-p-p.html)
-
Details a little sketchy but it looks like you with be able to pre-order and reserve a serial for a Proteus and Penelope setup via ECF GG forum
http://www.e-cigarette-forum.com/forum/gg/279447-official-gg-p-p-serial-number-request-thread.html (http://www.e-cigarette-forum.com/forum/gg/279447-official-gg-p-p-serial-number-request-thread.html)
(sounds like his current batch will be 2200 units)
info on the Proteus and Penelope
http://www.e-cigarette-forum.com/forum/gg/278892-p-p.html (http://www.e-cigarette-forum.com/forum/gg/278892-p-p.html)
and thats that julian, it's sold out already even before going on sale......look at the classifieds on UKV for 200 quid and upwards prices.
-
still loadsa spaces up i think 600 taken out of 2200, dont know how the will manage the logistics of shipping the correct numbered tubes to the
correct vendor etc.
-
still loadsa spaces up i think 600 taken out of 2200, dont know how the will manage the logistics of shipping the correct numbered tubes to the
correct vendor etc.
my mistake, i looked at that list and thought it was complete...be a good idea to get on that list if you want one, or if you just want to make a bit of money re selling it.
-
still loadsa spaces up i think 600 taken out of 2200, dont know how the will manage the logistics of shipping the correct numbered tubes to the
correct vendor etc.
my mistake, i looked at that list and thought it was complete...be a good idea to get on that list if you want one, or if you just want to make a bit of money re selling it.
i recon thell be quite a few folk buying to resell and make a few quid ::)
-
Will be 2 ml tank btw. Information is from GG sub forum at www.e-kapnisma.gr (http://www.e-kapnisma.gr)
-
Imeo has changed the size of the penelope from 2ml to 3ml
Post 402 quote
------------------------
"I made today a small modification to Penelope's cap and by increasing the length at about 2,5mm I manage to fit 1 more ml inside the tank. So Penelope will take 3ml of liquid. I think that its more than enough for a small cig. 2ml's were not enough for me."
http://www.e-cigarette-forum.com/forum/gg/278892-p-p-41.html#post5680722 (http://www.e-cigarette-forum.com/forum/gg/278892-p-p-41.html#post5680722)
-
http://www.e-cigarette-forum.com/forum/gg/278892-p-p.html (http://www.e-cigarette-forum.com/forum/gg/278892-p-p.html)
approx cost of Proteus and Penelope combo is 170 euros/£139.250
Preorder here
http://www.e-cigarette-forum.com/forum/gg/279447-official-gg-p-p-serial-number-request-thread.html (http://www.e-cigarette-forum.com/forum/gg/279447-official-gg-p-p-serial-number-request-thread.html)
-
Not a bad price then really :)
-
Does it have to be through ECF? And I'd like the number 1965.......... its says: bluegenzel 1965 e-smokeguru what do I do?............ help.....I'm scared! lol
-
I think I'm gonna put down for one at lunch then :)
-
Can someone see if i've done this right on ecf? pretty please with cherries on :P
-
I think if it says that it's already booked no?
You'd want whatever one delivered to e cigz London though I think ?
-
Yeah just looked down the booked list.....OK...ecigz it is....to be honest I dont care what number ......back to the drawing board :o
-
For someone who has never done this before can someone shed some light on the process please?
I've reserved a serial number and then I'm guessing it gets shipped to the relevant retailer?
What happens next? :)
-
HELP?
I can't post in that thread until I have 15 posts? :'(
Would someone be so kind as to pop my name in with a request for number 370 to e cigz london with username ukric?
Thanks
-
I managed to post with just 5?
Anyways it's done for you Ric :)
-
Thank you, you're a star :)
-
No problem just hope I've done it right :)
-
omg, youve all gone and ordered :o
wish i was on commission :)
Hope its a good device or your all gonna kill me :-[
-
I liked the look of it in Imeos video....So its not your fault if its crap...Its Imeos, hehehe :)
-
NO, its definately Julians fault ... he's a very naughty boy. :P
-
Hopefully I can have the number 1265........ its for December 1965 :) But if not, I dont care really :)
-
I did the same Fiona as I'm not really bothered what number it is so just went for the month and year I was born in 778 and yes Julian is a very naughty boy making me buy one :)
-
I put my name down for one too. First number that appeared to be free.
-
omg, youve all gone and ordered :o
wish i was on commission :)
Hope its a good device or your all gonna kill me :-[
Just sharpened my axe.... now looking up train times ;)
-
i hope the P&P is good, or i am a dead man :)
-
Just sharpened my axe....
my favourite one's in bedroom in the suitcase on the left ... i'll leave it where it is for now ... 8)
-
I know a few of you have seen my axe on camera :)
-
The list has been updated so everyone that requested serial numbers yesterday are all on :)
Still quite a few numbers available though if anyone else is interested :)
-
Cool...Thanks Irez ;D
-
What happens now apart from waiting? :)
-
For me its putting money aside and not touching it!!! ;D
-
List's been updated, so we're all on there proper now :)
-
Cool ;D
-
How much are they?
-
IRO £140 although the price isn't fixed yet.
It's not just the atomiser for that though, it's the mod too
-
Any links or videos of it?
-
http://www.youtube.com/watch?v=mQboA1ntthk# (http://www.youtube.com/watch?v=mQboA1ntthk#)
http://www.youtube.com/watch?v=vdx4IOEwURM# (http://www.youtube.com/watch?v=vdx4IOEwURM#)
-
Tempting! I'm not registered for the forum unless some1 would be ever so good and put my name on the list :)
-
Just register and say hello to a few folk in new members area.
You need 5-6 posts before you can reply to the thread takes 5 minutes mate.
-
I'm at work at the mo :( just on here using my iPhone. Anybody do it for me? Really appreciate it if use could
-
I think you need to be an ECF member...Not sure as its all new to me :)
-
1604 mixdoctor
I decided to go for it
8) Mixey 8)
-
Can any1 do it for me?
-
You have to do it I think......Because if someone does it for you its them who has to commit to pay for it........ I only had 11 posts and they let me order one..... ;D
-
I'll definitely pay for it! Just at work at the mo and tomorrow :(
-
I'll definitely pay for it! Just at work at the mo and tomorrow :(
I only have 7 posts but don't panic emmet their are plenty of numbers left bud you be able to do it when you get home their must be 500 places left so as I said you can do it any time to be honest mate
8) Mixdoctor 8)
-
Haven't a clue wat to do anyway! Did u order one doc?
-
yes took a while had to join another forum and then post until you got 5 posts I just said hello to the newbies to get my post count up and then that allowed me to post in the thread to give my name and number and because we are new it will only allow us 1 so to make it easier you may as well join now on you phone to get yourself half way there. go and sign up to
http://www.e-cigarette-forum.com/forum/ (http://www.e-cigarette-forum.com/forum/) once you have joined go to the new members section area cause you can only post in their http://www.e-cigarette-forum.com/forum/new-members-forum/ (http://www.e-cigarette-forum.com/forum/new-members-forum/) and say hi to peops you need to get your post count up once you have done that then the thread you want to sign up for the Penelope is http://www.e-cigarette-forum.com/forum/gg/279447-official-gg-p-p-serial-number-request-thread-82.html (http://www.e-cigarette-forum.com/forum/gg/279447-official-gg-p-p-serial-number-request-thread-82.html) I have given you page 82 as that is the list of numbers available then all you do is go to last page and put the name, number and shop you want like
Mixdoctor 1604 UK e-cigz-london
and thatys it you are done bud
8) Mixdoctor 8)
-
Cheers for that doc :) I'll do that once I finish my shift :)
-
no prob bud at least it all help you find the right places eh
enjoy your work
8) mixdoctor 8)
-
Anyone know how this list thing is going to work?
According to the info on the list, the vendors will have access to the list. But obviously so does everyone else. So what is stopping Joe bloggs from contacting ecigz and saying he is someone on the list? :o
-
was thinking the same thing! well thats me on the list now as well :)
-
it would be reasonably easy to stop Joe Bloggs nabbing the pre-orders.
just needs whoever mods the registration page to pm a code to each user.
then we give the code to release our individual penelope while paying.
-
Not too sure how its gonna be done, I guess some kind of code of something, via pm.
so far me, Scott, ukric, itsmeitis, fiona, jimblob, Irez, mixdoctor, big bill, Emmett & Funkybunch are on the list :)
-
Not too sure how its gonna be done, I guess some kind of code of something, via pm.
so far me, Scott, ukric, itsmeitis, fiona, jimblob, Irez, mixdoctor, big bill, Emmett & Funkybunch are on the list :)
I just wanted to say Julian, if it isn't any good I have a selection of axes and am just a bridge toll away ;D
-
dont blame me blame imeo lol :)
Im sure it will be a winner... without sounding like a fanboi, he aint let us down yet :)
-
dont blame me blame imeo
You're closer hehe
-
???
-
I'm sure of a couple of things going on past experience
They'll be fine
They'll increase in value
:)
-
Don't worry Julian, I'm sure it will be a belter and if not I'm sure there will be enough fanbois around to buy them off the classifieds ;D ;D ;D ;D
and besides I don't like paying the bridge tolls ;D ;D ;D
-
Yeah if they are crap we could always put them on ECF for a bajillion squid.
-
Don't worry if you miss the preorder I'm sure Smoktech is copying it right now. By the way, they got the Provari in stock now. ::)
http://www.alibaba.com/product-gs/546459658/Advantech_multi_functional_provari_vari_voltage.html (http://www.alibaba.com/product-gs/546459658/Advantech_multi_functional_provari_vari_voltage.html)
-
Don't worry if you miss the preorder I'm sure Smoktech is copying it right now. By the way, they got the Provari in stock now. ::)
http://www.alibaba.com/product-gs/546459658/Advantech_multi_functional_provari_vari_voltage.html (http://www.alibaba.com/product-gs/546459658/Advantech_multi_functional_provari_vari_voltage.html)
Stacked batteries make real Provari's cry (with mocking laughter!)
-
Wow, Stacked batteries. I'm surprised they didn't just clone the whole thing. So, its a Provari in name only. :D
-
officially on the list now :)
-
Cool ;D
-
Getting impatient already I hate waiting :(
-
interview with Imeo (GG)
http://www.youtube.com/watch?v=skdExpf0BEg#ws (http://www.youtube.com/watch?v=skdExpf0BEg#ws)
starts at about 55 mins
-
Nice show & interview.
-
At work, does he actually show the P&P?
-
At work, does he actually show the P&P?
just the half, or in other words just the P. ;D
-
According to ECL
Dear E-Cigz customers, the awesome Penelope and Proteus combination is currently in production and I can confirm that the release date will be around July 15th 2012!
:D
-
Sooner than I was expecting and just before my birthday :)
-
Cool!
-
Cool :) just 10 days after I come back from my holiday in the states :)
-
great news, if you can reserve one, they got new crazy rules, need 20 posts + paypal or ebay verification, and i made 5 posts that got merged into 1 as spam!
i dont even want a specific serial number, just any would do.
ah well, looks like im sticking to my ego and tank, these things will be all sold on day 1, with months of promised new stock that wont ever arrive.
-
Are you wanting one Monkeyboy?
I'm sure if you ask nice enough and maybe do a little dance someone registered on the forum would kindly put your name down?
-
Looks like the list has ended. All remaining numbers have gone to resellers :)
-
Yep, nice heads up Irez :)
anyone who wants one has til 22pm (bst) - approx 55 mins to get a request in.
The sellers are buying up the remaining numbers so looks like a sell out :)
-
:) looking forward to gettin my first GG :)
-
Same here any idea of prices and a release date yet?
8) Mixdoctor 8)
-
I heard it will be around £130 and 15th July according to Cam at ecigz london :D
-
Thanks Funkybunch
is that with postage do you know it don't really matter as I put £150.00 away but other members might want to know.
Thanks again for that m8
8) Mixdoctor 8)
-
http://e-cigz.co.uk/store/index.php?main_page=product_info&cPath=41&products_id=273 (http://e-cigz.co.uk/store/index.php?main_page=product_info&cPath=41&products_id=273)
-
http://e-cigz.co.uk/store/index.php?main_page=product_info&cPath=41&products_id=273 (http://e-cigz.co.uk/store/index.php?main_page=product_info&cPath=41&products_id=273)
[/quote
Ideal Thanks IreZ says it all really all the info you need
Thanks again
8) Mixdoctor 8)
-
I would contact Cam and express an interest as there may not be many available, a lot have been pre ordered via ecf
-
more penelope news
http://www.youtube.com/watch?v=WXBWMWmKPYc# (http://www.youtube.com/watch?v=WXBWMWmKPYc#)
http://www.youtube.com/watch?v=kdsnR0BkTlE# (http://www.youtube.com/watch?v=kdsnR0BkTlE#)
-
Cool........Thanks for sharing Julian ;D
-
Looks good, nice one Julian :D
-
:) Ta Julian
-
Looks brilliant, but close enough to my ody that it doesn't make me feel the need to break out the charge card.
-
I like it because its smaller....I think of it as the ladies version! hehehe
-
Looks brilliant, but close enough to my ody that it doesn't make me feel the need to break out the charge card.
You may change your mind when he shows off Proteus :)
-
I'm looking forward to see what its like..... ;D
-
Looks like they are taking per-orders already over at COV :)
It's only for the Penelope though as the Proteus is not ready. Not sure how it's gonna work to get both as the serial number is only on the Penelope? Anyone else know? :)
-
The serial number will be on the proteus along with 'By Imeo' the Penelope will have the GG wings on it, according to a post I saw on an ecf P&P thread
-
Sorry should of made that clearer :)
The pre-order is for Penelope Only as Proteus is not ready so what I mean is how is it going to work acquiring a Penelope if there is no serial number on it to reserve one?
Edit: 500th Post :)
-
From E-Cigz website:
DEAR CUSTOMERS THE ODYSSEUS & PENELOPE PRE-ORDER HAS BEEN RESCHEDULED WHILST WE MAKE SOME IMPROVEMENTS TO THE WEBSITE - CURRENT ETA IS WEDNESDAY EVENING 13/6/12. PLEASE CHECK THIS PAGE FOR UPDATES, A MAIL-OUT WILL BE SENT WITH FURTHER DETAILS. ETA FOR ODYSSEUS STOCK ARRIVING IS 18/6/12. A price of £73.49 has been added also.
-
I have obviously done masses of research on the p&p - not. Well I did check out some vids of Imeo with the Penelope but couldn't understand him.
So is the Penelope wick made the same way as we did the Oddyseus?
Can anyone remind me what wires we will need for the Penelope please.
Also, will 1mm wick work or has he come up with some thicker stuff we need to get.
Apologies for all the questions, but options seem to be watching a Greek make no sense via video or search through a million pages on ECF.
Cheers
Jim
-
Its all a load of Greek to me........ :D
By the looks of it its pretty much the same set up as the Oddy, with only a slight difference. Still needs resistant and non resistant wire, and wick wise I didnt notice if he uses and extra piece on the top like the Oddy, but it looks quite dinky, so not sure. Might be worth using a bit of Bulli wick on top of a CE2 wick. But I wont know until I get mine and play about with it.
Also Imeo has some new wire out that has the non res and res wire already made up. So if you dont like to fiddle it might be handy. Not sure how expensive it would work out though.
Some of the others will have taken more notice than me :)) I'm sure they know more :D
-
Cool, thanks Fi.
Will have to set my alarm for 9pm. Wouldn't want to be fast asleep at work and miss it, lol.
-
Yeah cant have you sleep on the job :P
-
Apparently it comes with 1m of wick and 1 pre-made wire :)
-
Does anyone know what he says in the video about the wire make up its so hard to hear what he says oh why can i not find the blooming link for the vid i had it 5 mins ago :(
-
Have you checked out Scott's review of the Oddysseus as it will be a similar if not the same process?
http://www.E-Cig-Reviews.com/odysseus.html (http://www.E-Cig-Reviews.com/odysseus.html)
-
Oh yer thanks silly me silly billy
-
I wonder if the Penelope will fit on TW's new Odyssey?
http://www.youtube.com/watch?v=zSz-TgtmNuQ#ws (http://www.youtube.com/watch?v=zSz-TgtmNuQ#ws)
-
I want my penelope. Kalafans got his already looks smart
(http://img193.imageshack.us/img193/7039/img1194i.jpg)
(http://ukvapers.com/index.php?app=core&module=attach§ion=attach&attach_rel_module=post&attach_id=14909)
-
Prurdy ;D
-
+1
A work of art (http://smileys.on-my-web.com/repository/Respect/respect-054.gif)
-
where does the oxidised mesh go?.......lol
-
distinct lack of o-rings visible in the picture ... looks okay overall mind ... tidy.
-
Looks good :D
-
Looks nice that. Will look the biz on my chrome provari.
-
Can't wait :)
-
Anyone know if kalafan polished that or if it comes that shiny? Looks a lot better than the pics we have seen thus far.
-
I believe thats how it comes, i think the ones pictured previously have mostly been prototypes
-
Cool, thanks :P
I thought ecigz were selling the proper wick tonight too. Been looking since 9ish.
-
I want mine now they say next week form e-cig london or now the goldengreek.co.uk
-
Yeah, think it says another week for all of us.
Wouldn't like to guess how Kalafan got his early although I bet his arse hurts, lol :P
-
Still not here yet........ Anyone got there's yet
-
nope ... but i expect a possibility of it arriving toward the end of next week ... not sure why but i do ... ;D
-
Between waiting for this and waiting for the Orion, you're in for double disappointment :p
-
worserer even than that Ric ... i bought another oddy too yesterday and still awaiting anything like a despatch notice on the stuff from sunday. ::)
-
I deliberately didn't Pm you about that when I saw it on GG, was trying to save you some money :(
-
;D ... i probarbly shouldn't have looked & i definately shouldn't have checked how many in stock ... ;D
-
i can take an element of comfort from finding one for sale here in the classies at an alarming price of 200+ ausie dollars ... hell i'd expect bouncer himself for that kinda wonga ... :P
-
To fit with the GG Proteus ...
http://www.youtube.com/watch?v=vdx4IOEwURM# (http://www.youtube.com/watch?v=vdx4IOEwURM#)
"The Penelope will take 3ml of liquid and it will be at 47,5mm. Its very very small as I see it. I made a 18mm mouthpiece so the total length with the mouthpiece attached will be at 65,5mm"
My god, this guy must get through a 30ml bottle every hour!
-
If anyone is struggling to find wick for the Penelope or Oddy and doesn't hold much faith in shoelace, cig-eliquid have some 2mm ce2 stuff in stock.
http://www.cig-eliquid.co.uk/DIY_Kits/cat649231_588851.aspx
Jim
-
thought the wick was 3m but thats a good link bookmarked ^^
-
thought the wick was 3m but thats a good link bookmarked ^^
It is. But this is the next best thing I guess. Can't find anywhere else doing 3mm and the last oddy lot was 2mm and worked fine.
Its easier getting hold of Elvis than the 3mm stuff so it seems :)
-
im hoping 2ml wick with the extra small piece doubled up in the coil (ala Mr. Bonners method) will do the trick,
plus, that site is pretty cheap, buy 3 lots get 2 lots for free
-
im on it got tons of 1mm wick for my bulli so plus that with the 2mm job done ^^
-
I wish they would sell out as I'm real tempted to buy another :)
I'm suprised they are still available though as I expected them to be out of stock within minutes like all the other GG stuff :(
-
im hoping 2ml wick with the extra small piece doubled up in the coil (ala Mr. Bonners method) will do the trick,
plus, that site is pretty cheap, buy 3 lots get 2 lots for free
Wondered what you was on about. Just rechecked the site and yeah it does say that, lol. Didn't notice. I ordered 7 lots iirc.
-
I wish they would sell out as I'm real tempted to buy another :)
I'm suprised they are still available though as I expected them to be out of stock within minutes like all the other GG stuff :(
Suprised too. Imeo must have made stacks of them this time. Can't see them not being popular.
-
postman been no penelope this week >:(
im down to my last carto, may have to buy more
-
I'd buy another weeks worth if I where you :(
-
yep definately wouldn't rely on Imeo ... as even when he sorts his sh!t out, it then falls to Cam ... ::)
seriously though MB ... you'll more than likely recieve a despatched e-mail prior to its posting, let alone its arrivin' ...
-
The Proteus subject is interesting. Was reading something yesterday where Imeo said he doesn't even have a prototype finished yet.
Funny that pre orders are supposedly going to be in July. I'd bet they won't even be ready in time for vapefest.
Always the optimist I know and can't wait to be proven wrong.
-
yep definately wouldn't rely on Imeo ... as even when he sorts his sh!t out, it then falls to Cam ... ::)
seriously though MB ... you'll more than likely recieve a despatched e-mail prior to its posting, let alone its arrivin' ...
Yeah, noticed German and USA customers have already started getting their Penelope's. Wonder what the hold up was for the UK.
-
THE GOLDEN GREEK UK - NEWS UPDATES
Friday June 29th
The Penelope stock is currently in transit and will arrive Monday. Please allow for at least one day for processing then the dispatch phase will commence. More Wick and ReadyWire will available mid next week, please check here for precise times, thank you.
-
oooooo YAY nice one for finding that post i gave up checking the site every 5 mins
-
oooooo YAY nice one for finding that post i gave up checking the site every 5 mins
+1 :P
-
+2 ;D
-
busy week ... ;D
-
There might be some rests of coolant and grease on the Penelopes. Some users in Germany had this. So give your Penelopes a good wash in soapy water before you use it.
-
penelope seems to kick it out, on an ego
http://www.youtube.com/watch?v=DFr3u1z-Feg# (http://www.youtube.com/watch?v=DFr3u1z-Feg#)
-
Nice size comparison shot of oddy and penelope
(http://img51.imageshack.us/img51/7104/52805210150989657308028.jpg)
-
Looks a lot smaller than I expected this weekend is proper gonna drag :(
-
looks quite a nice piece of kit,,,,i suppose its just a cute version of the oddy,,lol
-
Looks like I could do some eGo cones out of Bulli cones for the Penelope if anyone wants one
-
The Penelope is still in stock. Has he made too many of them?
http://www.e-smokeguru.gr/index.php/de/The-GG/PENELOPE.html (http://www.e-smokeguru.gr/index.php/de/The-GG/PENELOPE.html)
-
Isn't that for his pre-orders?
-
I think you can just order it over the shop as normal
-
Liked the look of the Penelope straight away but wanted an Odysseus.
Got the Odysseus.
Love the Odysseus.
Snapped.
Just ordered Penelope.
-
Liked the look of the Penelope straight away but wanted an Odysseus.
Got the Odysseus.
Love the Odysseus.
Snapped.
Just ordered Penelope.
Nice one :)
Lets hope their good, lol.
-
Got the Odysseus.
Love the Odysseus.
Got another Odysseus.
Love the Odysseuses.
Got yet another Odysseus.
Love the Odysseuseses.
Got yet another Odysseus.
Question my own sanity.
So ordered Penelope ... lol
-
^ Gg hoarder :-p
-
Got the Odysseus.
Love the Odysseus.
Got another Odysseus.
Love the Odysseuses.
Got yet another Odysseus.
Love the Odysseuseses.
Got yet another Odysseus.
Question my own sanity.
So ordered Penelope ... lol..... available next year (will it ever come)
-
Share the 'gg's' ::)
Not that i would know one end of a g from another?
Rebel without a gg ???
-
Dear Customers, the Penelope stock has arrived today along with extra wick,
ready wire and GGTS Odysseus bases.
Please be aware that the Penelope has been shipped in part form and we have
the task of preparing, checking and processing over 4000 parts. We will be
starting the dispatch process by the end of this week.
There are an unprecedented amount of pre-orders to process and we thank you
for patience. Extra spares will be released at the end of this week once we
start on the pre-order backlog - please check here for updates.
Thank you
-
:D :D :D :D :D :D
-
Picture of Penelope with a clear tank: http://db.tt/WBcpyV2v (http://db.tt/WBcpyV2v)
-
Nice ;D
-
Whos is that?
-
cheers for upping the pic Irez ...
i'm still not convinced i like the penelope mind ... i hope it looks better in the flesh, but so far i find the oddy much more impressive in appearence.
shouldn't matter too much if it vapes anywhere close to the oddy and hopefully the body or mod will complete the end look and bring the set together nicely ...
-
Ooooo nice ;D
-
Whos is that?
Kalafan posted it on UKV: http://ukvapers.com/topic/24094-odysseus-and-penelope-pre-order/page__pid__416400__st__220#entry416400 (http://ukvapers.com/topic/24094-odysseus-and-penelope-pre-order/page__pid__416400__st__220#entry416400)
-
Looks nice with the clear tank :)
-
Mid-week anyone got it yet im still sitting at the door ready for snail mail to come
-
Nope, still waiting.... I got an email though yesterday to say they are n the UK and now being assembled...
-
Dispatch process due end of this week so hopefully get them for the weekend :)
-
yes same here ... 8) ... not long now ... ;D
-
Yeah hope so.
Was hoping to get it today with them arriving on Monday, but shouldn't expect miracles.
Saturday is good for me, working until then.
-
yep ... Saturday is where im at with my expectation too ... 8)
-
I'm going to say, Monday, but likely it will be 2-3 days later, so, Thursday is the day people! Anything before then is a postal miracle.
They never happen.
-
could be right Ric ... but i'm suspecting we'lll recieve tracking info very late Thursday and actual despatch will occur during Friday ... potential for arrival Saturday ... :-\
-
You know I mean the 12th right?
-
2000 and never for me ive not gone the tracking way
-
Just got a dispatch email :)
-
Ooh, me too!
I still expect it next Thursday
#royalmailblackhole
-
mine too ... looks like it will be most probarbly Friday for arrival as despatch notice often comes prior to postage with Cam si it will most likely go to post tomorrow ...
-
Blummin eck, just woke up to find dispatch notice :)
-
Same Ooooooo its a race to see who gets it first.
-
same here :)
-
Ditto :)
-
hi all,
i got a despatched email on tuesday night at around 2am and its just been delivered now........so i reckon those who have just got a despatched email will get theirs tomorrow with a bit of luck :)
(http://i176.photobucket.com/albums/w178/igetcha/Snapbucket/9030C3E5.jpg)
just set it up and vaping a treat so far :D
-
Cool....Does it vape as nice as the Oddy?
-
nice one Scott, well what are your initial impressions.
Or shall we await your review.
Looks very nice on your provari :)
-
Cool....Does it vape as nice as the Oddy?
no difference in performance really, but i immediately preferred the new mouthpiece......its a little longer and thinner than the Oddy mouthpiece and feels a lot nicer
build quality is the usual high standard, the engraving looks really nice (though it feels quite rough to the touch, but more because the engraving is quite deep) and it doesn't make your mod top heavy
i think you will really like it Fi......not saying its feminine or anything, lol......just that its a lot lighter than the Oddy :)
the new combined wire will make things easier for a lot of people, but due to the fixed length of the resistance section you are limited to whatever resistance it gives you (but you can still make your wires up like on the Oddy if you wanted to make a higher / lower resistance etc)
the resistance section is pretty long and i ended up with about 8 or 9 coils which i thought would give me a very high resistance......but the wire must be a pretty high gauge as the resistance still came out at 1.6ohm which i find to vape great :)
cheers
scott
-
Cool...I look forward to having a play about with it....I think it will look nice with my LT ;D
-
I Would like to know what you got in the kit scott. I dont want to find out tommorow. Its like christmas eve for me right now :D
-
cheers Scott & nice pic ... it penelope looks like it'll be good afterall ... here's hoping tomorrow brings penelopes' ... 8)
-
I Would like to know what you got in the kit scott. I dont want to find out tommorow. Its like christmas eve for me right now :D
hi mate,
you get the Penelope, small bundle of the 3mm wick and 5 of the special pre joined wires (not counted them but it looks like 5, lol)
word of warning though, the wires are in a thin length of bubble wrap and could easily be discarded as scrap......double check before throwing in the bin! lol ;)
-
Thanks scott for the info im the type of yeti that would rip open and chuck the rest. Then sit there saying where is the wire
-
Just come across a video that may help folk build there Penelope's up until Scott does a review :)
It starts from 20mins in
http://www.vapourtrails.tv/?p=4015 (http://www.vapourtrails.tv/?p=4015)
-
mine arrived! and built!
a couple of niggles, one of my nuts is a bit slack (ooer missus) so it doesn't trap the wire like it should, so atm i am coiling it around to secure it.
Also, i only got 1 premade wire (which i expected), maybe Mr Bonner is special so got more for free ;)
Vapes like a charm on my ego twist, very top heavy on this small device.
-
One hung low? .......Sorry could resist :P
Glad your liking the vape! Cant wait for mine to arrive! ;D
-
Well as it turns out, there were only 2 of the wires in the package, lol
-
Got my dispatch email and tracking number in the early hours of this morning! Can't wait to get it:) No smart jokes on how long it will take me to sell it by the way ;) lol! Get a video up too Scott so I'll know what I'm doing :) lol
-
;D ... lol
-
Well I still have the did so that's a bonus lol, never had an oddy before so dont really know how to work the Penelope yet, hope it's not too hard! Even for someone like me who gives up too quick lol
-
nah ... should be pretty easy to set it up ... almost the same as the oddy too, so Scotts Oddy video will give you all the instruction required in setting it up ... 8)
-
Hopefully! Did u order on ged?
-
Still not here yet hummmph i hope its get a knock at the door in the morning.
-
Its definately worth the wait Cerberus :)
-
i hope so thanks irez.
Its killing me the wait
-
And when Penelope arrives its all to do again for Proteus :)
-
So now everyone's had a play....
I likes it.
I prefer the mouthpeice.
It's a bit more fiddly to set up.
-
Also, did anyone notice from the video, despite saying that the channel acts as the terminal, he still seems to trap the wire between the base and the ring?
-
internals are same as new/revised/updated Oddy ... i prefered the old system ...
Oddy seems more substantial and so more worthy of its price tag ...
Penelope is good ... but not outstanding when compared to others.
glad i bought one ... definately a keeper ... the proteus could ultimately alter my end opinion.
-
Speaking of which.... GG france has a price up for the Proteus.
-
& ... ? or in other words, how much ?
-
Same as the Penelope. €90
-
hmmm ... so if that remains and the proteus does surface, just short of £150 entirely for the combined two.
not too bad ... :-\
-
Also, did anyone notice from the video, despite saying that the channel acts as the terminal, he still seems to trap the wire between the base and the ring?
I set it up exactly like the Oddy......trapped the wire, cut both wick ends to the same length in line with the bottom o-ring etc and it works fine
I couldn't understand what he cut the wire and wick at the same time and shorter on one side?
-
No need to trap the wire between, works fine without, one less thing to do :)
Yeah I wasn't sure on that, can't imagine it would affect anything. I did it, but don't think that bit will make any difference.
-
So you are just relying on the ring to hold it in place? Correct?
-
Yep, s'working reet gud ;)
-
I didn't trap the wire and it works fine, I think it is a little more fiddly with the smaller ceramic, but the externals are cleaner lines. I think that Ged has it right, the proteus will be the the key and how they work together. :D
Yes Scott the ring holds it in place ;)
-
My ODY does not flood out when filling any longer --> after not trapping the negative wire under the ring. Since the wire is bent over the metal side and has the "opportunity" to make contact all the way down i guess it is ok.
I didnt like that method of not having a solid connection but it does seem to work ok, i set up penelope the same way.
*note i think the pre made wires will have a percentage of failures at the point where it is forged together, mine broke on the first twist. I made a standard coil as i did with ODY. Also found that if you come up with a coil that Ohms out at 2.5 it will be about 2.8-2.9 after a little use.
Tony
-
I am trying to envision what you mean by not trapping the (-) wire under the ring ??? can someone post a pic of what your doing with the (-) on the ody ?
-
If you find Scott's video on the Odysseue review on Youtube ( http://www.youtube.com/watch?v=0kZVFOA-X7c#ws (http://www.youtube.com/watch?v=0kZVFOA-X7c#ws) )
you will see it in great detail.
In the meantime:
When you run the wire down the side with the metal (on the ODY v2 or Penelope) you wrap it around the threads between the base and that ring that the mouthpiece butts up against.
-
Hum... I have that vid burned into my memory ;D I build my ody virtually the same as Scott does and he has the (-) between the screw that the mouth piece butts up against and the base. I could wrap the (-) around the the inner body threads , but it would still be secured between the screw and body . Maybe I have a v1 ody Idk but it's the exact same as the one Scott is showing in his vid.
-
Mine came yesterday too, but just had time to set it up and have a go before I went to bed. Was cream crackered so went to bed after work, lol.
I set mine up without trapping the wire in the ring and cutting the wire and wick off shorter on the metal channel side and it worked a treat first time.
Made up my own coil with some .15 wire and it came out a bit high at 2.5 ohms but just cranked my provari up to 4.2 and it worked great.
I am loving that new 3mm wick that came with it. Wicks fantastic. Hope I get lucky and manage to get some of cams when he puts it up again. Missed out last time.
Vapour production is massive. Been practising my Vape rings, lol.
-
just got back from work and there it was!
Man the quality of this is amazing. I got to have the GGTS or Proteus.
Now to do a lot of watching vids from scott because this is my first time making a wire and I got one shot at it haha.
Oh and anything I might need to know other then putting vaseline on the threads and such? Did any of you guys had to do that burning over a blue flame to get a soapy taste off?
-
I burned all my ceramics off to avoid the soapy taste issue- not sure if I needed to though as I never tried any of them without per burning them :P
-
On my ODY v2 I ended up with a weird taste, my mates over here said burn it! so i did and it was gone. I got penelope today and completely forgot about it, but did not have any weird taste.
just got back from work and there it was!
Man the quality of this is amazing. I got to have the GGTS or Proteus.
Now to do a lot of watching vids from scott because this is my first time making a wire and I got one shot at it haha.
Oh and anything I might need to know other then putting vaseline on the threads and such? Did any of you guys had to do that burning over a blue flame to get a soapy taste off?
-
well with almost a fail :P i made my first wire. Man this is great such a difference in vapor. I do notice a weird taste just so you guys know so I will burn this over a blue flame. I not to sure, but my mixture does not taste the same as it did with my carto.
Man I am actually getting a little buzz over here.
-
Never mind about the weird taste its gone :))
-
Did you have to burn it over a blue flame?
-
i didn't bother burning the ceramic with the Penelope and it vapes fine mate.......as far as I'm aware, it was only the 1st run of Odysseus that had the issue with a soapy tasting ceramic
-
Cheers Scott, looking forward to trying mine later, it's at my mums as I thought it may have cane when I was suppose to be on holiday! How many coils did you end up with?
-
i didn't bother burning the ceramic with the Penelope and it vapes fine mate.......as far as I'm aware, it was only the 1st run of Odysseus that had the issue with a soapy tasting ceramic
when s the video coming Scott ?
-
Did you have to burn it over a blue flame?
Nope I just kept vaping. :))
-
Do you start turning the wire from the join to make the coils? Sorry for all the Q,s but it's al, new to me!
-
Cheers Scott, looking forward to trying mine later, it's at my mums as I thought it may have cane when I was suppose to be on holiday! How many coils did you end up with?
hi mate,
i think i have about 8 coils on mine......but that gives me a resistance of 1.6ohms and vapes great :)
and yes, you start the coils from the join ;)
-
Cheers mate! Can't wait to have a go later when I get mine!
-
My premade wire broke as I was coiling it :( (dodgy weld) Might get some when they are back in stock, but it works just fine with a set up like the Ody ;D
-
I ain't got any other wire apart from the kanthal i use for my did, so I've only one shot :(
-
As I said I almost failed when making my firts wire. I did broke mine also, but all I had to do was twist it together and make sure it did not contact the ceramic just incase.
Edit: and don't worry as scott said in his video it is really easy and you just need to get the hang of it.
-
@ Emmette ... if you do happen to snap/break the duo wire, you can still join the no resistance pieces to kanthal as in the Oddy tutorial ...
even if all does go well, keep the cut-offs from the no-res wire ... they'll work for your second coil too ...
-
If you break the wire don't get mad and put in on the classifieds :)
Have faith and a little patience :)
-
love it kicks like a mule. only problem is it dont like to fire on my bolt played with the + post and it wont have it it works on all my other mods but not the bolt unless i use a adapter thing apart from that its the dogs. oh hang on its me all i needed to do was really screw it down i was being to kind to it ^^ oh my days its really hitting now yay im in love
-
Dropped from 15mg to 12mg and it's still kicking!
-
im dizzzzzzzzy at 12mg im going to finish this drum off then go to 6mg i think
-
It kicks even harder when you forget to turn the liquid control on :o
-
Does anyone know the resistance of the resistance wire. It feels pretty thick.
-
i belive its 1.6 ohms ...
-
just double checked using multimeter ... 1.6 ohm
-
Ok cool thanks.
-
Mines all made up but.....The metasl ring that is supposed to tighten to keep the positive wire in place only screws in to a certain point. It wont screw up tight..Leaving a gap...I have it working though. The positive wire is wrapped round and tucked in between that slight gap.
-
it seems a lot of people have experienced that fiona.......i managed to close the gap a little by tightening it as much as i could, then undoing, then tightening, then undoing etc etc and it now closes enough to trap it securely
-
can you take the nut off,
turn it round, (unside down)- the nut that is
and then thread back on.
-
I have tried screwing in the other way but its even tighter.....I'll have another play with it when I build another coil...but for now I'm just going to give it a good vaping :)
-
;D good good, how you finding it Fiona.
size looks, vapour etc ?
-
;D good good, how you finding it Fiona.
size looks, vapour etc ?
well she's finding it to be defective...but because it's been made by the main man not much fuss will be made about it by anyone......fish...don't you love me?
-
Its a great size.....Vapes well.....But the screws could have been better...The large ring that screws over the atty catches on my one....Hoping it will get better over time/usage.
-
Mines all made up but.....The metasl ring that is supposed to tighten to keep the positive wire in place only screws in to a certain point. It wont screw up tight..Leaving a gap...I have it working though. The positive wire is wrapped round and tucked in between that slight gap.
Mine is exactly the same Fi. Bit of a bummer but it still works. The gap is smaller now than it was but it is still there.
-
I hope to get mine loosened up too. Fingers crossed ;D
-
i had a simular sorta issue with the bottom nut on my new oddy inards
what worked for me is turning nut upside down
and screwing and inscrewing, it just seemed to wear in.
hope yours does too, jc is right it should be smooth as butter when you get it
but if it doesnt settle ill pm imeo and see what he can do.
-
I’m so fighting the urge to not order one of these, I think I might lose as he has a website now to order from rather than buying from a forum :P
-
Its a lovely vape Bobbins............I just need to loosen the nuts ;D
-
I’m so fighting the urge to not order one of these, I think I might lose as he has a website now to order from rather than buying from a forum :P
You`ll need to be quick. Cam said on his website there isnt many left.
-
You`ll need to be quick. Cam said on his website there isnt many left.
he's bound to say that in order to shift the bladdy things ... lol
only joking mind and it appears they/he might be down to their/his last one ...
-
You`ll need to be quick. Cam said on his website there isnt many left.
he's bound to say that in order to shift the bladdy things ... lol
Shhhh, I`am helping his urge to get one, lol.
-
;) ... ;D lol
-
Kir Fanis is producing clear tanks for the penelope
http://ukvapers.com/topic/26142-penelope-clear-windows-by-kir-fanis/ (http://ukvapers.com/topic/26142-penelope-clear-windows-by-kir-fanis/)
-
Cant Ged make some?.............Ged can I have a clear penelope tank please? ;D
-
mine is currently out of town ... otherwise i'd be looking into it ... :(
-
Don't forget everyone, the 3mm wick is going up for sale tonight at goldengreek.co.uk 2300hrs. Save some for me though, lol :P
-
Don't forget everyone, the 3mm wick is going up for sale tonight at goldengreek.co.uk 2300hrs. Save some for me though, lol :P
That was lastnight wasn't it?
-
does the Penelope work and set up the same as the Odysseus ? gona watch scots tutorial know have seen it before but didnt really pay much attention
also did i see some where that you can control the amount the Penelope wicks ?
-
the Penelope does work and set up the same as the Odysseus, yes.
the wixking does have a control too, yes.
-
Don't forget everyone, the 3mm wick is going up for sale tonight at goldengreek.co.uk 2300hrs. Save some for me though, lol :P
That was lastnight wasn't it?
lol, you serious?
Hope not.
-
It kicks even harder when you forget to turn the liquid control on :o
lol thats what I said. and I have the airflow half way up
-
Well here's an update for everyone! Well, finally got the chance to get my Penelope and put it together! So how did I get on first time?? 1.5ohm coil and vaping like an absolute champ :) well proud of myself ;) ;) lol
-
Don't forget everyone, the 3mm wick is going up for sale tonight at goldengreek.co.uk 2300hrs. Save some for me though, lol :P
That was lastnight wasn't it?
lol, you serious?
Hope not.
Yes, you were right, lol. Forget what I said everyone :'(
-
According to Golden Greek Proteus will be delayed and the current ETA is 1.5 months from now :(
-
hmm, wonder if they'll be in time for VF then :-s
-
According to Golden Greek Proteus will be delayed and the current ETA is 1.5 months from now :(
Dont know whether to pre order a ggts then. Think I might.
-
What just made me laugh though, I was given a website to buy some 3mm wick in Greece. So I go on there and its 1 euro a metre including tax etc, which is fine.
It wont let me select a shipping option, so I email the store.
I get a reply back saying it will cost me 1.48 euro`s a metre.
Funny, charging us extra because they can.
The email address had Kalafan at the start. No wonder then, lol.
-
would this work on the penelope does anyone know? http://www.ebay.co.uk/itm/OIL-LAMP-WICKS-3-metres-3-mm-diameter-Free-P-P-/290719112708?pt=UK_Antiques_AntiqueFurniture_SM&hash=item43b0359e04#ht_849wt_954 (http://www.ebay.co.uk/itm/OIL-LAMP-WICKS-3-metres-3-mm-diameter-Free-P-P-/290719112708?pt=UK_Antiques_AntiqueFurniture_SM&hash=item43b0359e04#ht_849wt_954)
-
Its made of cotton Emmett.......... I think it would just burn.
-
There is this
http://www.ebay.co.uk/itm/Silica-Rope-3-mm-Silica-Wick-high-quality-temperature-resistance-1000-C-/290733529323?pt=LH_DefaultDomain_3&var=&hash=item43b11198eb#ht_500wt_1415 (http://www.ebay.co.uk/itm/Silica-Rope-3-mm-Silica-Wick-high-quality-temperature-resistance-1000-C-/290733529323?pt=LH_DefaultDomain_3&var=&hash=item43b11198eb#ht_500wt_1415)
but I'm not too trusting of ebay
-
What just made me laugh though, I was given a website to buy some 3mm wick in Greece. So I go on there and its 1 euro a metre including tax etc, which is fine.
It wont let me select a shipping option, so I email the store.
I get a reply back saying it will cost me 1.48 euro`s a metre.
Funny, charging us extra because they can.
The email address had Kalafan at the start. No wonder then, lol.
I`am starting to doubt my own sanity. Sure it said 3mm a few days ago. Now there are two types of wick at the "correct" prices :-[
-
So now that we all have the penelopes then, where do we buy the wick and wire?
-
So now that we all have the penelopes then, where do we buy the wick and wire?
Terry is going to be getting some 3mm wick on ukv wire stores.
Wires.co.uk for the wire. 0.20mm Nickel wire and 0.15 or 0.16 Nickel Chrome wire.
-
could you give me the exact links for both the res and no res jimblob? Cheers mate ;D
-
http://wires.co.uk/acatalog/E-CIG_IATTY_ATOMIZER_WIRE.html (http://wires.co.uk/acatalog/E-CIG_IATTY_ATOMIZER_WIRE.html)
-
ordered my penelope today , how long did every one else's take to come ? im a little confused with the pre order , are they in stock at the mo or not ?
-
The penelope are in stock, so it all depends how quickly Cam at ecigs can process the order,
hopefully the initial backlog of orders has been cleared so hopefully you should get it
by approx wednesday .
-
o not bad then , i was expecting a little bit of a wait lol
-
I ordered mine nine days ago and they haven't sent it out yet. Don't know when it'll be.
-
o there will be a little bit of a wait lol
-
Its made of cotton Emmett.......... I think it would just burn.
Cotton wick works fine in Penelope.
I'm using this stuff at the moment...
http://www.ebay.co.uk/itm/10-Metre-Cotton-Braided-Candle-Wick-for-1-3-4-to-2-43mm-50mm-MBC-2-/290657103551?pt=UK_Carfts_Candle_SoapMaking_EH&hash=item43ac836ebf#ht_1289wt_936 (http://www.ebay.co.uk/itm/10-Metre-Cotton-Braided-Candle-Wick-for-1-3-4-to-2-43mm-50mm-MBC-2-/290657103551?pt=UK_Carfts_Candle_SoapMaking_EH&hash=item43ac836ebf#ht_1289wt_936)
Boil it in pre-biled water for a bit before you use it, it doesn't wick so well without it.
Obviously don't dry burn it but other than that it's fine.
-
Thats interesting to know..... ;D
-
I've got a load of 2mm bullie wick and some .20mm wire will they be any use when my Penelope arrives ?
-
I'd imagine so yes. You might want to double it up or unravel some to add to your length of wick if that makes sense.
-
Just got my dispatch notice.
-
Cool! Postman watch ;D
-
Love vape mail,
hate waiting.
Be good to have it for the weekend though.
-
If you have a dispatch notice it should be there soon...Fingers crossed ;D
-
If you have a dispatch notice it should be there soon...Fingers crossed ;D
+1 Mine arrived the second day after I had received the dispatch notice
-
Got mine today at work.
Think you all no what I will be doing later ;D
-
Polishing it? :P
-
has any one got a link to the No resistance wire needed ? im assuming the .20 kanthal i have will be ok to use for the centre section that makes up the coil ?
-
Yeah should be fine, just a bit infer than you would if it were .15 :)
-
just a bit what ? lol sorry
-
longerer .... iPhones eh? ;)
-
lol thanks
-
Does any one know if theres a deacent tutorial on building the penelope cos the only one i can find is in german and goes on fof 45 minuits.
it be a great help, i'm not gonna guese and end up breaking it. But its a proper head buster having the thing but not being able to fire it up.
please help :(
-
Not that I've seen but I can try to describe it.
You should have a thin large I ring and a thick large o ring.
Put the thick one inside the top cap.
Put the thin one over the base threads and slide it to the bottom.
You should have a ceramic. Put this inside the threaded ceramic holder.
There should be a centre post. Put the small solid plastic ring over the threaded section and slide to the plate.
Put the post, threaded side, through the hole in the ceramic holder. Put the locking but inside the ceramic. tighten.
Put the bottom circular knurled nut onto the other side of the centre pin. This may be tight. Use Vaseline or sumat.
put the remaining rubber o ring on the bottom of the centre pin, after the knurled nut.
when a coil has been made, insert the atomiser section into the base, be careful not to cross thread and tighten the larger knurled ring around the ceramic holder towards the base.
Put the mouthpiece on next. Then the body and finally the top cap. :)
-
if you google it mate there seem to be a few about
-
pm sent to hungryghost
-
Chunk one of imeo's make up of the penelope
http://www.youtube.com/watch?v=WXBWMWmKPYc# (http://www.youtube.com/watch?v=WXBWMWmKPYc#)
0.15 rez and none rez wire i think from the mic crackle
Chunk two
http://www.youtube.com/watch?v=kdsnR0BkTlE# (http://www.youtube.com/watch?v=kdsnR0BkTlE#)
imeos post on youtube
I only send premade wires to my sellers . But if you want to make your own wires then you can buy nickel or silver wire at 0,2mm in width (for NR wire) and nichrome wire at 0,15mm in width (for R wire)
And a ss mesh of the penelope
Wire talk
[url=http://www.youtube.com/watch?v=yfB65kBvqRo&feature=youtu.be# (http://www.youtube.com/watch?feature=player_detailpage&v=hk1x_Rj-emE#[/url)
-
Got mine today.
Top notch.
-
Got mine today.
Top notch.
how you getting off with it mate ??
-
Over the moon with it mate. Great plume of vapour on my very first draw. Looks great too, nice logo. Gonna need a clear tank though.
Bit of faff building it but evrything fitted together well.
Basically, I love it.
-
Great post Cerberus, haven't seen that mesh wick one before.
I'd just made a new wick up but ripped it off and went with that one :P
Vapes great :)
-
Thanks jim was on the hunt to find out what wire he was using and just found the ss mesh one.
-
The GG Clear extension I purchased (3 of them now) all develop a hairline fracture in the center of the window within 24 hours and spread out. Never dropped, lightly tightened, all VG juices, no citrus etc... notified COV, but no response on the issue itself. Is there someone else making clear windows FOR ody and penelope ?
ty
Faz
Over the moon with it mate. Great plume of vapour on my very first draw. Looks great too, nice logo. Gonna need a clear tank though.
Bit of faff building it but evrything fitted together well.
Basically, I love it.
-
I got clear tanks for the oddy from Kir Fanis on ukv. Good quality and no problems yet. I think Jim posted he is on vaporwall. I'll wait until ukv is back up.
-
mine has been dispatched today so will be here soon i hope lol
-
arrived today , gona have a try setting it up now , will let u now how it goes
-
Nice one Chilly :)
-
Well so far so good :)
some of the smaller threaded parts on the atty section are a little bit ruff to start of , but after a few screws on and off they seem to be quite a bit better
i have found it really easy to coil and set up and gives off a hell of a lot of vapour , will give you the ultimate verdict once ive had a good vape on it lol
-
Did anyone else with a stiff bottom nut notice that when you are rebuilding and you try and unscrew the nut that has the wire trapped, it unscrews the whole post inside the ceramic and the bolt inside comes loose too. Even though you tightened the bolt well to begin with. It's easy enough to sort each time but it's a pain in the backside.
-
Yep mine does this too.......
-
Mine also
-
Penelopes are showing available on preorder again
Dear customers, the Penelope is now on backorder (current ETA 20/7/12) and the Proteus is currently in production. Please check the news section for updates on the release date for the Proteus.
http://goldengreek.co.uk/store/index.php?main_page=product_info&cPath=41&products_id=273 (http://goldengreek.co.uk/store/index.php?main_page=product_info&cPath=41&products_id=273)
-
Did anyone else with a stiff bottom nut notice that when you are rebuilding and you try and unscrew the nut that has the wire trapped, it unscrews the whole post inside the ceramic and the bolt inside comes loose too. Even though you tightened the bolt well to begin with. It's easy enough to sort each time but it's a pain in the backside.
had the same problem until i read some tips on the GG forums, basically sorted by holding the nut steady with a screwdriver and using pliers to twist the center post really tight.
was worried that id crack the ceramic but was ok, but maybe wait until ceramic replacements are available if your worrried
-
Ceramics will be available either Tuesday/Wednesday this week :)
-
Hmmm, I ordered 3 ceramics for the Oddy, not cracked one yet, think I'll save the 1.50 or whatever :)
-
Did anyone else with a stiff bottom nut notice that when you are rebuilding and you try and unscrew the nut that has the wire trapped, it unscrews the whole post inside the ceramic and the bolt inside comes loose too. Even though you tightened the bolt well to begin with. It's easy enough to sort each time but it's a pain in the backside.
had the same problem until i read some tips on the GG forums, basically sorted by holding the nut steady with a screwdriver and using pliers to twist the center post really tight.
was worried that id crack the ceramic but was ok, but maybe wait until ceramic replacements are available if your worrried
Thanks, I'll give it a go :P
-
Just ordered one 8)
-
Nice one bobbins :P
-
Thanks for all the help peoples, I finaly got her goin...thar she blows ;D
-
Enjoy :D ;D :D