Author Topic: Something to do...  (Read 23500 times)

0 Members and 1 Guest are viewing this topic.

Offline Grove

  • Hero Member
  • *****
  • Posts: 1202
  • It's not a clone, it's a coincidental likeness
Re: Something to do...
« Reply #30 on: August 30, 2013, 07:38:19 PM »
yeah figured as much! LOL

Anyway managed to get it working, i have a lathe, loads of bits and pieces so thats that tragedy sorted.

Started an atty....so far 3 hours has got me a hybrid base, a centre pole/post and an oring groove ready for some glass! lol :)

WIP pics to follow, there will be a few so be ready (for anyone interested anyway!)

you've done more in 3 hours than Bob has done in 4 months lol

Offline itsmeitis

  • Diamond Member
  • *******
  • Posts: 19147
  • lapsus linguae
Re: Something to do...
« Reply #31 on: August 30, 2013, 07:38:36 PM »
good to read you have at least something to vape with for the evening eddy. 8)

Offline itsmeitis

  • Diamond Member
  • *******
  • Posts: 19147
  • lapsus linguae
Re: Something to do...
« Reply #32 on: August 30, 2013, 07:39:44 PM »
you've done more in 3 hours than Bob has done in 4 months lol

bobs in the design stage - ;D and he needed go down home depot ;D

Offline Fiona

  • Global Moderator
  • Diamond Member
  • *****
  • Posts: 15052
  • I dont like cold tea!
Re: Something to do...
« Reply #33 on: August 30, 2013, 07:40:51 PM »
Do they do Popcorn Chicken there?  :P

My Community

Re: Something to do...
« Reply #33 on: August 30, 2013, 07:40:51 PM »



Offline itsmeitis

  • Diamond Member
  • *******
  • Posts: 19147
  • lapsus linguae
Re: Something to do...
« Reply #34 on: August 30, 2013, 07:43:17 PM »
nope - that'd be kfc

Offline eddy-r3

  • Hero Member
  • *****
  • Posts: 582
  • Web Jazzler
Re: Something to do...
« Reply #35 on: August 30, 2013, 07:44:19 PM »
LMAO I love how Bob is always the muse of attack where hybrids are concerned! :)

Ged > Me to! LOL was wetting my knickers a little bit thinking wth would i vape?! :O lol but yeah, all sorted!

Im off to make the top section and hopefully, wont snap any bits this time! :D lol (but we'll see!)

Going to get glass cut tomorrow, i HOPE i have a working atty by tomorrow evening! Not enough time......

Offline Grove

  • Hero Member
  • *****
  • Posts: 1202
  • It's not a clone, it's a coincidental likeness
Re: Something to do...
« Reply #36 on: August 30, 2013, 07:45:10 PM »


 :P :P :P :P :P :P :P :P :P :P

Offline eddy-r3

  • Hero Member
  • *****
  • Posts: 582
  • Web Jazzler
Re: Something to do...
« Reply #37 on: August 30, 2013, 08:49:21 PM »
so this is where i am, may not look like much, but it is a lot of work to get here.

LOL

realised, that because of the wood, the mod is 24mm diameter (instead of the preferred 22mm just due to how its made and battery sizes etc) ANYWAYS, i have made a 22mm atty (at least started), looking at some 24mm glass now though, so could be some alterations down the line!

:) I started @ 4:30pm today, so 4 hours or so to get here.


My Community

Re: Something to do...
« Reply #37 on: August 30, 2013, 08:49:21 PM »



Offline itsmeitis

  • Diamond Member
  • *******
  • Posts: 19147
  • lapsus linguae
Re: Something to do...
« Reply #38 on: August 30, 2013, 08:50:52 PM »
looking good 8)

Offline zarf

  • Hero Member
  • *****
  • Posts: 598
  • Tin-foil milliner wonders what happened to avatar?
Re: Something to do...
« Reply #39 on: August 30, 2013, 08:51:37 PM »
marvellous.

(read my pm to you - don't laugh (too loudly) ...  :D)


ps. happy you got summat to vape on  too...

Offline VapeMad89

  • Hero Member
  • *****
  • Posts: 538
Re: Something to do...
« Reply #40 on: August 30, 2013, 09:58:04 PM »
Looks good eddy, master craftsman! ;)

Offline eddy-r3

  • Hero Member
  • *****
  • Posts: 582
  • Web Jazzler
Re: Something to do...
« Reply #41 on: August 30, 2013, 10:36:57 PM »
I wouldnt go that far!

Total Time so far - 5.5hours.

BEFORE ANYONE SAYS - I AM AWARE THE ORINGS ARE TOO LARGE.....ordered wrong size. Got new ones on the way! :)

Anyway, im just about beat for the night so packed up after taking a few photos! :) Its a bit of a weighty item i have to admit, feels GOOD!

My Community

Re: Something to do...
« Reply #41 on: August 30, 2013, 10:36:57 PM »



Offline eddy-r3

  • Hero Member
  • *****
  • Posts: 582
  • Web Jazzler
Re: Something to do...
« Reply #42 on: August 30, 2013, 10:37:12 PM »
Another image

Offline Rocc

  • Hero Member
  • *****
  • Posts: 758
  • The best tea is cold
Re: Something to do...
« Reply #43 on: August 31, 2013, 12:13:36 AM »
Quote
bobs in the design stage - ;D and he needed go down home depot ;D
take the piss all you guys want i have alot going on and i will get around to my lathe when i get the time  :-*
as it is the house come first  :(

Offline ukric

  • Platinum Member
  • ******
  • Posts: 4543
  • Chasing Da Clouds
Re: Something to do...
« Reply #44 on: August 31, 2013, 12:33:26 AM »
Quote
bobs in the design stage - ;D and he needed go down home depot ;D
take the piss all you guys want i have alot going on and i will get around to my lathe when i get the time  :-*
as it is the house come first  :(

No worries, Eddy ain't makin me a silica atomiser anyway so I'll await your lathing mastery ;)