E-Cig-Reviews.com - Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

FULL LIST OF SUPPLIER DISCOUNT CODES - CLICK

20% Discount Code Added For WWW.JACVAPOUR.COM - ECR69

15% Discount Code Added For WWW.T-JUICE.COM - ECR69

10% Discount Code Added For WWW.MIRAGECIGARETTES.CO.UK - MC69

Pages: [1] 2   Go Down

Author Topic: Ebarron pro  (Read 3405 times)

Gazrick

  • Platinum Member
  • ******
  • Offline Offline
  • Posts: 1508
Ebarron pro
« on: July 21, 2013, 08:10:36 PM »

Just worked out I need no resistance wire for the ebarron pro lol. I'm a tad confused of how this works if anyone can help? It's not arrived yet so got a while to learn.
So only the coil should be resistance wire? And I just twist the non res to it and put that through the holes?
Sorry if I sound dumb lol but never used non res not sure where to get it. 😔
Logged

Whistler

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 38
Re: Ebarron pro
« Reply #1 on: July 21, 2013, 08:46:00 PM »

Yes mate pretty much that. I started off twisting then got hold of a wire welder. Makes the job so much neater, once you have got the Han of zapping anyway.
Logged

Whistler

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 38
Re: Ebarron pro
« Reply #2 on: July 21, 2013, 08:46:59 PM »

Also to get no res wire pop over to the vape mesh company. Got some .2 nickel to zap onto my .2 kanthal.
Logged

jono7969

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Ebarron pro
« Reply #3 on: July 21, 2013, 09:29:27 PM »

I tend to buy the pre built coils for this as they seem to last ages and I'm lazy and have sausage fingers
Logged

zarf

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
  • Tin-foil milliner wonders what happened to avatar?
Re: Ebarron pro
« Reply #4 on: July 21, 2013, 10:21:31 PM »

Just worked out I need no resistance wire for the ebarron pro lol. I'm a tad confused of how this works if anyone can help? It's not arrived yet so got a while to learn.
So only the coil should be resistance wire? And I just twist the non res to it and put that through the holes?
Sorry if I sound dumb lol but never used non res not sure where to get it.

Hi Gazrick,

You can get 99.99% silver wire (i.e. "no-res"istance wire) from almost any established industrial wire company, along with any other Stainless Steel product (e.g. mesh,cables,etc.).  Many also offer Kenthal (both wire and ribbon).

Industrial-use prices are usually lower than high street retail (or even some "wholesale") prices, but the purchase volumes required usually preclude the small buyer from benefitting from these. Fortunately, there are industrial companies that set up smaller "trade arms"...

Try a company like this one, based in Warrington :

e.g. of :

no-res wire: 

 http://www.wireandstuff.co.uk/products/0.2mm-99.99--Silver--200-micron------Soft-Wire---5-Metre-Coil-2397.html
(they have other sizes, and in any length ...: http://www.wireandstuff.co.uk/products/Silver-99.99--Jewellery-Wire-1.html)



Other stuff they carry which may be of interest:

Stainless Steel mesh:
(you can buy in sizes like B5,A4,A3,etc.  Or, if you're in the mood/have a need(!), you can even buy rolls of over 50 metre lengths of the stuff,I suppose...

selection of SS meshes: http://www.wireandstuff.co.uk/products/E-Cigarette-Super-Fine-Mesh-Sheets.html

Silica Wick & Ekowool:

http://www.wireandstuff.co.uk/products/Silica-Wick-and-Ekowool.html

Kanthal and Nichrome wire: (AND kanthal ribbon)
nb: this link belongs to same company, just a different "arm", targetting  the vaping community (they also use the alias of "vape-atomizer-mesh.com")...

start here, and scroll through their items, and pricelist: --> http://themeshcompany.co.uk/acatalog/25-micron-super-fine-mesh.html
 

Enjoy.

ps. for postage I've just used Royal mail, 2nd class - stuff takes a few (3-4) days to get to me,  sometimes a week. depending on which day I buy online...

Logged

Gazrick

  • Platinum Member
  • ******
  • Offline Offline
  • Posts: 1508
Re: Ebarron pro
« Reply #5 on: July 21, 2013, 10:34:26 PM »

Thanks guys, ill see how I get on when I need to replace the original. I may buy some pre built ones first. If I like it that is 😊
Logged

jono7969

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Ebarron pro
« Reply #6 on: July 21, 2013, 10:48:52 PM »

I love mine use it everyday mate
Logged

Gazrick

  • Platinum Member
  • ******
  • Offline Offline
  • Posts: 1508
Re: Ebarron pro
« Reply #7 on: July 21, 2013, 11:03:52 PM »

I love mine use it everyday mate
Can't wait 😊 does it look good on any other mods?
Logged

Gazrick

  • Platinum Member
  • ******
  • Offline Offline
  • Posts: 1508
Re: Ebarron pro
« Reply #8 on: July 22, 2013, 12:28:10 AM »

Just watched pbusardos review of this on YouTube, he uses only resistance wire and it works just fine. Is there need for no res?
Logged

Whistler

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 38
Re: Ebarron pro
« Reply #9 on: July 22, 2013, 04:52:58 AM »

You can use just resistance wire but the overall resistance will be higher than you aim for.
Logged

ilegal

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1266
  • Five coils to Yuma
Re: Ebarron pro
« Reply #10 on: July 22, 2013, 09:34:01 AM »

Hi gazrick, just for the pot, I know Mev makes and sells the zappers that bind the no-res and res wire together which probably saves time and cut fingers. You can see Scott using one in his Ithaka review - they're in a shop here too:

http://www.juice-kitchen.co.uk/Zapper/p1723043_9328941.aspx
Logged

Gazrick

  • Platinum Member
  • ******
  • Offline Offline
  • Posts: 1508
Re: Ebarron pro
« Reply #11 on: July 22, 2013, 09:44:55 AM »

Thanks mate ill see how I get on with normal resistance first tho 😊
Logged

a1laserboy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 688
  • frikkin lasers!
Re: Ebarron pro
« Reply #12 on: July 22, 2013, 11:38:48 AM »

Just a note, the zapper doesn't work with the silver no res wire, it is too soft and just blows the end off (not a fault with the zapper but the wire itself). You need to use nickel wire.
Logged

jono7969

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Ebarron pro
« Reply #13 on: July 22, 2013, 01:38:30 PM »

I rebuilt mine with res wire and it worked but the unit gets hot quickly unless I built it wrong
Logged

Gazrick

  • Platinum Member
  • ******
  • Offline Offline
  • Posts: 1508
Re: Ebarron pro
« Reply #14 on: July 22, 2013, 07:33:28 PM »

That's ok ill see how I get on 😊
Logged
Pages: [1] 2   Go Up