E-Cig-Reviews.com - Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

FULL LIST OF SUPPLIER DISCOUNT CODES - CLICK

20% Discount Code Added For WWW.JACVAPOUR.COM - ECR69

15% Discount Code Added For WWW.T-JUICE.COM - ECR69

10% Discount Code Added For WWW.MIRAGECIGARETTES.CO.UK - MC69

Pages: [1]   Go Down

Author Topic: help for the higher voltage  (Read 1882 times)

1 year vaper

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 65
help for the higher voltage
« on: July 17, 2013, 08:09:10 PM »

hi guys its about 1 year vape ing  and still cant get it right . i have bn practicing whit attys for a week i followed scotts vid for rebuild a coil but still not producing vapor like scotts .when i try to increase the voltt higher than 4.4 will come the burn taste i dont now how much raps do i have to turn to make it ruining properly i am useing 32 wire 2mm wick the same as scotts.thankyou     
Logged

funkybunch

  • Diamond Member
  • *******
  • Offline Offline
  • Posts: 7045
  • More mods than I need, less than I 'need'
    • Funkybunch's redbubble page
Re: help for the higher voltage
« Reply #1 on: July 17, 2013, 08:23:52 PM »

Welcome to the forum

What gear are you using?
Logged

1 year vaper

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 65
Re: help for the higher voltage
« Reply #2 on: July 17, 2013, 08:32:28 PM »

protank on itaste v1
Logged

funkybunch

  • Diamond Member
  • *******
  • Offline Offline
  • Posts: 7045
  • More mods than I need, less than I 'need'
    • Funkybunch's redbubble page
Re: help for the higher voltage
« Reply #3 on: July 17, 2013, 08:34:48 PM »

protank on itaste v1



I have no experience rewicking one of those I'm afraid, but I'm sure that someone will be able to offer some advice
Logged

Capt12B

  • Global Moderator
  • Diamond Member
  • *****
  • Offline Offline
  • Posts: 8035
  • 30% of all fire deaths are attributed to analogs
Re: help for the higher voltage
« Reply #4 on: July 17, 2013, 08:38:07 PM »

to the ECR 1yv. I typically run a 5/4 wrap with both mesh and wick. Sounds like you just may be wrapping too tight or some other factor that could be causing juice not to feed well.
Logged

1 year vaper

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 65
Re: help for the higher voltage
« Reply #5 on: July 17, 2013, 08:43:46 PM »

thats what i been doing 5 raps reading 3.3ohm but nothing compered to scotts vid.
Logged

1 year vaper

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 65
Re: help for the higher voltage
« Reply #6 on: July 17, 2013, 08:50:45 PM »

and why he getts the reading of 1.3-1.6 ohms whit 5 raps and when i do the same i get 3.3 .thakyou for your replys
Logged

igetcha

  • Administrator
  • Diamond Member
  • *****
  • Offline Offline
  • Posts: 8543
  • www.E-Cig-Reviews.com
    • E-Cig-Reviews.com
Re: help for the higher voltage
« Reply #7 on: July 17, 2013, 10:45:14 PM »

hi mate,

ive never made a vid showing how to coil a Protank.......are you sure it was me?? lol
Logged

1 year vaper

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 65
Re: help for the higher voltage
« Reply #8 on: July 18, 2013, 05:57:19 AM »

hi scott about the protank no but whats the deference from the vision eternity cause i got one too and the exact same result thankyou.
Logged

1 year vaper

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 65
Re: help for the higher voltage
« Reply #9 on: July 18, 2013, 06:03:31 AM »

i wish someone can help me about this !.
Logged

DirkDampf

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1027
Re: help for the higher voltage
« Reply #10 on: July 18, 2013, 08:38:03 AM »

I've never seen Scott doing more than four wraps on his coils. Correct me if I'm wrong Scott.
Try to do only four wraps on two strands of 2mm silica this should give ya around 1.5 ohms. If  resistance is still too high check the connection to your battery tube if your atty connects properly.
Logged

stevemontuno

  • Platinum Member
  • ******
  • Offline Offline
  • Posts: 4557
  • The Dude
Re: help for the higher voltage
« Reply #11 on: July 18, 2013, 09:41:44 AM »

Are all the coils lighting up evenly and make sure your tank is empty when making the coil,,also try and centre the mesh in the hole once you've done your coil and also the mesh should not be touching the bottom of the tank,,

Sounds like you've got a hot spot if your getting burn taste at 3 ohm
Logged
Pages: [1]   Go Up