Author Topic: guide to making a coil on a zen  (Read 2385 times)

0 Members and 1 Guest are viewing this topic.

Offline wyrm1973

  • Administrator
  • Diamond Member
  • *****
  • Posts: 7682
  • Smoke free over 5 years.
guide to making a coil on a zen
« on: September 05, 2012, 05:27:33 PM »
good little video showing how to coil up a Zen. 

And i though scott was the coil master :)


Offline Capt12B

  • Global Moderator
  • Diamond Member
  • *****
  • Posts: 8033
  • 30% of all fire deaths are attributed to analogs
guide to making a coil on a zen
« Reply #1 on: September 05, 2012, 05:35:48 PM »
Has has it down to a science ;)

Offline itsmeitis

  • Diamond Member
  • *******
  • Posts: 19147
  • lapsus linguae
Re: guide to making a coil on a zen
« Reply #2 on: September 05, 2012, 05:38:52 PM »
credit where credits due ... is that shot on beta max :P

Offline Jimblob

  • Platinum Member
  • ******
  • Posts: 3292
Re: guide to making a coil on a zen
« Reply #3 on: September 05, 2012, 05:43:25 PM »
Word is the zaps are going up on Provape later today.

My Community

Re: guide to making a coil on a zen
« Reply #3 on: September 05, 2012, 05:43:25 PM »



Offline Frankie

  • Platinum Member
  • ******
  • Posts: 2115
Re: guide to making a coil on a zen
« Reply #4 on: September 05, 2012, 07:29:35 PM »
Word is the zaps are going up on Provape later today.
Or maybe a video 2000 double sided cassette

Offline Big Bill

  • Platinum Member
  • ******
  • Posts: 2226
  • Squonking ...
Re: guide to making a coil on a zen
« Reply #5 on: September 07, 2012, 10:04:58 AM »
A few tips on maintenance for the Zenesis and Z-attys:

When it starts to taste funky, syringe the liquid out, remove the top cap and top O ring and rinse that lot in hot water.

... Gently remove the fused quartz tank (make sure you have removed the top O ring prior to this!) and also rinse with warm water and dry ...

Then, gently pull up the wick (pushing from the bottom) and remove it completely, leaving the coil intact (while doing this, make sure you do not pull up or lose the insulator) ... put your wick aside (it can be rinsed and burned if necessary), then, dry burn the wiclkless coil and rinse the all lot in warm water.

After drying everything, gently reinsert the the wick (from the top, you may need to gently roll the bottom between your fingers first to shrink it a little) and reassemble your mod/atty ... it will vape as good as new!  :D

I personally find the Zen~ attys and Hybrids amongst the easiest to setup and maintain and I loooooooooooove how they vape!  :)


Offline Big Bill

  • Platinum Member
  • ******
  • Posts: 2226
  • Squonking ...
Re: guide to making a coil on a zen
« Reply #6 on: September 07, 2012, 10:12:03 AM »
Word is the zaps are going up on Provape later today.

I am also lead to believe they will appear on there very soon ...
 
  ;D

They may sell out quickly though!! (Z-Atty-Us sold out in less than an hour!)   :o

Offline pwmp44

  • Sr. Member
  • ****
  • Posts: 447
  • GGSS, Touchwood All and loads of other bits
Re: guide to making a coil on a zen
« Reply #7 on: September 08, 2012, 04:27:13 AM »
Great vid Julian.

He makes it look so easy. Practise makes perfect I guess

My Community

Re: guide to making a coil on a zen
« Reply #7 on: September 08, 2012, 04:27:13 AM »