E-Cig-Reviews.com - Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

FULL LIST OF SUPPLIER DISCOUNT CODES - CLICK

20% Discount Code Added For WWW.JACVAPOUR.COM - ECR69

15% Discount Code Added For WWW.T-JUICE.COM - ECR69

10% Discount Code Added For WWW.MIRAGECIGARETTES.CO.UK - MC69

Pages: [1] 2   Go Down

Author Topic: My Bulli A2-t has arrived  (Read 7329 times)

andye

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 46
My Bulli A2-t has arrived
« on: March 26, 2012, 01:54:00 PM »

I've only been vaping on it a few
hours but so far so good.
Making my first atty was simple if not a little fiddly but thanks to Scots video its no big deal.   

The draw seemed a bit too light at first but now it's settled down a bit and the atty wire has  got blackened and gummed up it's great.  I do get a bit of dry harshness after 4 or 5 puffs on it where it's not wicking fast enough but I'm over using it a bit as my head is spinning from the nicotine

The wicking could also be down to my my cheap juice, being to thick.

I've a feeling that my batteries are a bit past their best so things should be even better once I get my hands on a new device to pair up with the Bulli.

Overall I'm really pleased with the Bulli and think its well worth the money.

Andy
« Last Edit: March 26, 2012, 11:17:54 PM by andye »
Logged

itsmeitis

  • Diamond Member
  • *******
  • Offline Offline
  • Posts: 19147
  • lapsus linguae
Re: My A2-t has arrived
« Reply #1 on: March 26, 2012, 02:21:37 PM »

nice one Andy. i too like the bulli. 8)
i'm sure you'll have it perfected in little time. enjoy.
Logged

Irez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: My A2-t has arrived
« Reply #2 on: March 26, 2012, 02:31:14 PM »

Have you tried it without using the wick inside the mesh? It does seem to wick better that way especially if you are using thick juice. It will take some experimenting but once you get it right you will love even more :)
Logged

Fiona

  • Global Moderator
  • Diamond Member
  • *****
  • Offline Offline
  • Posts: 15052
  • I dont like cold tea!
Re: My A2-t has arrived
« Reply #3 on: March 26, 2012, 02:36:29 PM »

I'm sure you'll get to know it in no time Andy....like Irez, I dont put wick inside my mesh. I use a high ratio of VG and it does tend be slow wicking, if the wick is in place....And even now I have to fiddle about with it if I've put a new piece of mesh in....
Logged

andye

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 46
My A2-t has arrived
« Reply #4 on: March 26, 2012, 02:56:56 PM »

Thanks for all the advice everyone.
I think I was filling the tank up too much as it seems to be wicking much better now I'm half way through this tankful. 

I've been reading through the other posts in the forum and seeing what others had been trying.
I think I'll get some spare wick, wire and mesh in and have a play with the different Ways.

All the best
Andy
Logged

DirkDampf

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1027
Re: My A2-t has arrived
« Reply #5 on: March 26, 2012, 03:02:44 PM »

Congrats to you Bulli. I'm sure you will love it.
Logged

Jimblob

  • Platinum Member
  • ******
  • Offline Offline
  • Posts: 3292
Re: My A2-t has arrived
« Reply #6 on: March 26, 2012, 08:52:58 PM »

I set it up the normal way for the Atty itself, but when it comes to the spike I don't use wick but I oxidize some mesh and shove some of that down the spike. Only takes a little bit, just so its touching the top of the coil.

Oh the flavour is bloody outstanding.

First time I do the spike thing, I drop a few drops of liquid on the mesh down the spike before I finish putting the bulli together. Seems to get it going.

Jobs a good 'un.

Logged

andye

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 46
Re: My A2-t has arrived
« Reply #7 on: March 26, 2012, 11:29:07 PM »

I set it up the normal way for the Atty itself, but when it comes to the spike I don't use wick but I oxidize some mesh and shove some of that down the spike. Only takes a little bit, just so its touching the top of the coil.

Oh the flavour is bloody outstanding.

First time I do the spike thing, I drop a few drops of liquid on the mesh down the spike before I finish putting the bulli together. Seems to get it going.

Jobs a good 'un.

 ;D Cheers that seems to have got the VG based juice flowing a treat.

Andy
Logged

andye

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 46
Re: My Bulli A2-t has arrived
« Reply #8 on: March 28, 2012, 04:45:17 PM »

I picked up a good tip for getting the Bulli to wick better of a youtube video last night. you can force it to wick the juice by just putting your finger over the air hole and giving it a suck without firing it up. it seems to force the e-juice down the spike on to the atty.

Andy
 
Logged

Capt12B

  • Global Moderator
  • Diamond Member
  • *****
  • Offline Offline
  • Posts: 8036
  • 30% of all fire deaths are attributed to analogs
Re: My Bulli A2-t has arrived
« Reply #9 on: March 28, 2012, 04:52:39 PM »

Thats a good tip and applies to all attys and cartos ;)
Logged

andye

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 46
Re: My Bulli A2-t has arrived
« Reply #10 on: March 31, 2012, 05:08:29 PM »

I've just had the seal become too loose on the cart that I've been using since I got the Bulli and the e-juice just leaked strait through the atty.
The wire, mesh and wick is very cheap now I've bought some in bulk but these soft caps on the cart are they the weak link in the repairable atomiser Idea?

Any links to where I can buy these type A (I think) soft caps for the tanks in bulk would be much appreciated. I've only found them on the TW site so far.

Andy

 
Logged

Fiona

  • Global Moderator
  • Diamond Member
  • *****
  • Offline Offline
  • Posts: 15052
  • I dont like cold tea!
Re: My Bulli A2-t has arrived
« Reply #11 on: March 31, 2012, 05:15:19 PM »

Logged

stevemontuno

  • Platinum Member
  • ******
  • Offline Offline
  • Posts: 4557
  • The Dude
Re: My Bulli A2-t has arrived
« Reply #12 on: March 31, 2012, 05:17:01 PM »

a good way of getting it to wick is to pull the mouth piece out then put it back in,,,do that 3 times and it should be good to go,,,each time you do it you should see an air bubble float up to the to of the tank  ;) enjoy your new bulli dude  8)
Logged

andye

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 46
Re: My Bulli A2-t has arrived
« Reply #13 on: March 31, 2012, 05:27:58 PM »

a good way of getting it to wick is to pull the mouth piece out then put it back in,,,do that 3 times and it should be good to go,,,each time you do it you should see an air bubble float up to the to of the tank  ;) enjoy your new bulli dude  8)


 8) cheers Fiona I should have thought to look to the east :D I should be set to vape for a very long time now.

Andy
Logged

Fiona

  • Global Moderator
  • Diamond Member
  • *****
  • Offline Offline
  • Posts: 15052
  • I dont like cold tea!
Re: My Bulli A2-t has arrived
« Reply #14 on: March 31, 2012, 05:28:34 PM »

Your welcome :)
Logged
Pages: [1] 2   Go Up